VapCor Inc.
Ocean Oil Rig
Home » Products » Pipe Systems

Pipe Systems

NoSpray® Protection System

An aluminum /glass cloth jacketing system designed to prevent the flammable spray of hot oil which can come in contact with hot surfaces thus causing fires in vessel engine rooms. Meets SOLAS Regulation II-2/15.2.11/.12

NoSpray® Shields

Designed to contain the spray of hazardous liquids in vessel engine rooms, a cause of dangerous fires and loss of life and property. NoSpray® Shields are manufactured in multiple layers from a silicone rubber applied on a silica fibre fabric, specially formulated to withstand high temperatures and pressures, and an aluminum foil lining, which creates a corrosion resistant barrier for long lasting protection.

PetroWrap® Anti-Corrosion Tape Systems

Provide a superior way to protect your deck equipment, hydraulics, steel pipes, flanges, valves, marine pilings and structures, or any other equipment, from the effects of corrosion. Composed mainly of petrolatum and specific anti-corrosion agents, PetroWrap® Tape Products are formulated to provide economical long-term protection from water, salt, alkalis, and acids and require no maintenance.

CanSeal Marine Tape

A heavy duty sealing tape manufactured in Canada with extraordinary strength, adhesion and flexibility. At a full 5 mm thick and reinforced with fiberglass mesh, CanSeal Marine Tape assures that your cargos are damage free.

CanFix Emergency Repair Kit

Quick Repair Kit is a complete system for making emergency repairs to a wide variety of pipe materials. CanFix consists of a patented, fiberglass cloth impregnated with water activated resin that sets in minutes with no measuring, mixing, or messy cleanup. Each kit contains a roll of CanFix cloth, a tub of epoxy for filling and sealing, a pair of latex gloves, and complete instructions for use.

Approved and Used by the U.S. Navy and Coast Guard.

ExoWrap® Insulation System

The one-step insulation system, is the quick and easy way to insulate high temperature surfaces in vessel engine rooms. ExoWrap® Insulation System is a revolutionary system made from bio-soluble vitreous silicate fibre which is reinforced with an outer jacket of heat sealed aluminum foil. In tape or blanket format, ExoWrap® Insulation System can be easily removed and reinstalled by using the ExoWrap® Silhesive Tape and is rated for use to 1,000ºC max. ExoWrap® Insulation System can be used throughout the engine room.

Meets solas regulation ii-2/15.2.10 (fire protection in case of fuel oil system failure)
Meets imo resolution msc.61 (67) adoption of the international code for the application of fire test procedures

SteamKote High Temperature Protection System

Replacement and maintenance of corroded hydraulic lines, steam pipes, and valves is expensive and time consuming. SteamKote sealant has been specifically formulated as an anti-corrosive coating to protect deck equipment, helping avoid costly repairs. SteamKote is resistant to high temperatures and is flexible enough not to crack or peel during expansion and contraction of pipes.

HydraTech Marine HydraWrap®

An FRP (Fiber Reinforced Polymer) repair system engineered to restore or enhance the structural integrity of pipe and infrastructure. Each HydraWrap® system is a uniquely designed high performance Carbon Fiber Reinforced Polymer (CFRP) Composite that consists of a 100% solids high build epoxy Primer, a 100% solids epoxy Wet-Out resin, and carbon fiber fabric. The Primer provides excellent adhesion to a variety of substrates while allowing a sag free application at high film builds. The Wet-Out resin is designed to thoroughly wet out the fiber forming a composite matrix with a very high tensile and flexural properties.

Straub® Sealing Systems

These systems are FLEXible, economical, reliable, space and time saving couplings custom made and ready to install. They are so reliable that STRAUB® offers a five year guarantee on each properly installed coupling. Installs in Minutes.

Straub® couplings come delivered in one piece. All you need to do is slip it over the pipe end and tighten two or three bolts with a torque wrench. That's it!

  • There is no need to prepare the pipe or grease the gaskets.
  • There are not a handful of parts or bolts to fumble with.
  • It is lightweight so only one person is normally required to install it.

Installations normally take 5 - 15 minutes depending on location.

Hydromax (Electronic Water Conditioner)

Alters the reaction between scale-forming ions in hard water. Hard water contains high levels of calcium, magnesium, and other divalent cations. When subjected to heating, the divalent ions form insoluble compounds with anions such as carbonate. These insoluble compounds have a much lower heat transfer capability than heat transfer surfaces such as metal